Free letter K SVG

Letter K in a ring monogram SVG

Letter K in a ring monogram, as a solid black shape — Letter K in a ring monogram. The preview is the SVG file itself.

A serif K set inside a ring and sized so that its tips run into the ring, which welds the two into a single piece. A one-letter monogram for a tumbler, a tag or a keyring. Inside the 100 mm ring the K measures 65.8 × 66 mm.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	996 mm at this size
Narrowest part	2.4 mm at this size
Nodes	62 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.61 mm	253 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	1.2 mm	506 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	1.8 mm	759 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	2.4 mm	1,012 mm	4	Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)	3.7 mm	1,518 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	4.9 mm	2,024 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	7.3 mm	3,036 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter K SVG files

← Letter K in Lilita One All 18 letter K designs Letter K cut from a disc →