Free letter J SVG

Letter J stencil plate SVG

Letter J stencil plate, as a solid black shape
Letter J stencil plate. The preview is the SVG file itself.

A rounded plate with a block J cut through it, ready to use as a paint or spray stencil. The J is 61 × 76 mm, and the plate leaves 12 mm of margin round it to mask overspray.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size85 × 100 mm (3.35 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length643 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes34 curve and line segments

Measured from the file. PNG: 1,712 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.85 × 1 in (22 × 25 mm)Over 1.5 mm163 mm110Vinyl, card and thin sheet
1.7 × 2 in (43 × 51 mm)Over 3 mm327 mm30Any material, including 3 mm wood and acrylic
2.55 × 3 in (65 × 76 mm)Over 4.6 mm490 mm12Any material, including 3 mm wood and acrylic
3.4 × 4 in (86 × 102 mm)Over 6.1 mm653 mm6Any material, including 3 mm wood and acrylic
5.1 × 6 in (130 × 152 mm)Over 9.1 mm980 mm2Any material, including 3 mm wood and acrylic
6.8 × 8 in (173 × 203 mm)Over 12 mm1,307 mm1Any material, including 3 mm wood and acrylic
10.2 × 12 in (259 × 305 mm)Over 18 mm1,960 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter J SVG files

← Letter J cut from a heart All 18 letter J designs Letter J outline →