Free letter D SVG

Letter D in a laurel wreath SVG

Letter D in a laurel wreath, as a solid black shape — Letter D in a laurel wreath. The preview is the SVG file itself.

A serif D standing inside a laurel wreath that is open at the top. Loose pieces, the wreath and the letter, so use transfer tape to keep their spacing when you apply it. The D is 49.5 × 50 mm inside a wreath 100 mm across.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 92 mm (3.94 × 3.61 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	3: 2 outer edges and 1 cut-out
Cut length	1,267 mm at this size
Narrowest part	1.7 mm at this size
Nodes	353 curve and line segments

Measured from the file. PNG: 2,000 × 1,838 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.92 in (25 × 23 mm)	0.43 mm	322 mm	100	Too fine for most machines
2 × 1.83 in (51 × 47 mm)	0.86 mm	644 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.75 in (76 × 70 mm)	1.3 mm	965 mm	12	Vinyl, card and thin sheet
4 × 3.66 in (102 × 93 mm)	1.7 mm	1,287 mm	6	Vinyl, card and thin sheet
6 × 5.5 in (152 × 140 mm)	2.6 mm	1,931 mm	2	Vinyl, card and thin sheet
8 × 7.33 in (203 × 186 mm)	3.5 mm	2,575 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.99 in (305 × 279 mm)	5.2 mm	3,862 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More letter D SVG files

← Polka dot letter D All 18 letter D designs Letter D with a drop shadow →