Free Let’s Get Ship Faced SVG

Let’s Get Ship Faced in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Let’s Get Ship Faced in Lobster, as a solid black shape
Let’s Get Ship Faced in Lobster. The preview is the SVG file itself.

“Let’s Get Ship Faced” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut18: 11 outer edges and 7 cut-outs
Cut length1,287 mm at this size
Narrowest part1.1 mm at this size
Nodes343 curve and line segments

Measured from the file. PNG: 1,744 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.87 × 1 in (22 × 25 mm)0.28 mm327 mm110Too fine for most machines
1.73 × 2 in (44 × 51 mm)0.56 mm654 mm30Fine detail: vinyl and paper only, weed with care
2.6 × 3 in (66 × 76 mm)0.84 mm981 mm12Fine detail: vinyl and paper only, weed with care
3.47 × 4 in (88 × 102 mm)1.1 mm1,308 mm6Vinyl, card and thin sheet
5.2 × 6 in (132 × 152 mm)1.7 mm1,961 mm2Vinyl, card and thin sheet
6.94 × 8 in (176 × 203 mm)2.2 mm2,615 mm1Vinyl, card and thin sheet
10.4 × 12 in (264 × 305 mm)3.4 mm3,923 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Let’s Get Ship Faced SVG files

← Let’s Get Ship Faced in Pacifico All 13 Let’s Get Ship Faced designs Let’s Get Ship Faced in Kaushan Script →