Let the Adventure Begin outline lettering SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Let the Adventure Begin” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.
What is in the file
| Size | 100 × 65 mm (3.94 × 2.55 in), scales to any size |
|---|---|
| Pieces | 21 separate pieces |
| Outlines to cut | 62: 21 outer edges and 41 cut-outs |
| Cut length | 1,260 mm at this size |
| Narrowest part | 1.7 mm at this size |
| Nodes | 597 curve and line segments |
Measured from the file. PNG: 2,000 × 1,323 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.65 in (25 × 16 mm) | 0.43 mm | 320 mm | 140 | Too fine for most machines |
| 2 × 1.3 in (51 × 33 mm) | 0.86 mm | 640 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.94 in (76 × 49 mm) | 1.3 mm | 960 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.59 in (102 × 66 mm) | 1.7 mm | 1,280 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.89 in (152 × 99 mm) | 2.6 mm | 1,920 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.18 in (203 × 132 mm) | 3.5 mm | 2,560 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.78 in (305 × 198 mm) | 5.2 mm | 3,840 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Let the Adventure Begin SVG files
-
Let the Adventure Begin stencil plate Solid · one piece
-
Let the Adventure Begin with a drop shadow Layered · 10 pieces
-
Let the Adventure Begin with a mountain range Solid · 17 pieces
-
Let the Adventure Begin in Pacifico Solid · 6 pieces
-
Let the Adventure Begin in Lobster Solid · 10 pieces
-
Let the Adventure Begin in Kaushan Script Solid · 21 pieces
-
Let the Adventure Begin in Lilita One Solid · 21 pieces
-
Let the Adventure Begin in Alfa Slab One Solid · 20 pieces
← Let the Adventure Begin with stars All 13 Let the Adventure Begin designs Let the Adventure Begin stencil plate →