Free Kiss Me at Midnight SVG

Kiss Me at Midnight outline lettering SVG

Kiss Me at Midnight outline lettering, drawn as a line
Kiss Me at Midnight outline lettering. The preview is the SVG file itself.

“Kiss Me at Midnight” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 37 mm (3.94 × 1.47 in), scales to any size
Pieces19 separate pieces
Outlines to cut45: 19 outer edges and 26 cut-outs
Cut length1,324 mm at this size
Narrowest part1.4 mm at this size
Nodes483 curve and line segments

Measured from the file. PNG: 2,000 × 796 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.36 mm336 mm210Too fine for most machines
2 × 0.75 in (51 × 19 mm)0.71 mm673 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.12 in (76 × 28 mm)1.1 mm1,009 mm27Vinyl, card and thin sheet
4 × 1.5 in (102 × 38 mm)1.4 mm1,345 mm14Vinyl, card and thin sheet
6 × 2.24 in (152 × 57 mm)2.1 mm2,018 mm4Vinyl, card and thin sheet
8 × 2.99 in (203 × 76 mm)2.8 mm2,690 mm3Vinyl, card and thin sheet
12 × 4.49 in (305 × 114 mm)4.3 mm4,036 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Kiss Me at Midnight SVG files

← Kiss Me at Midnight with hearts All 12 Kiss Me at Midnight designs Kiss Me at Midnight stencil plate →