Free Japan SVG

Japan with its name beneath SVG

Japan with its name beneath, as a solid black shape — Japan with its name beneath. The preview is the SVG file itself.

The solid shape of Japan with “JAPAN” in narrow capitals under it. The letters of “Japan” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	72 × 100 mm (2.82 × 3.94 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	11: 8 outer edges and 3 cut-outs
Cut length	575 mm at this size
Narrowest part	1.1 mm at this size
Nodes	549 curve and line segments

Measured from the file. PNG: 1,456 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.72 × 1 in (18 × 25 mm)	0.28 mm	146 mm	130	Too fine for most machines
1.43 × 2 in (36 × 51 mm)	0.56 mm	292 mm	35	Fine detail: vinyl and paper only, weed with care
2.15 × 3 in (55 × 76 mm)	0.84 mm	438 mm	15	Fine detail: vinyl and paper only, weed with care
2.87 × 4 in (73 × 102 mm)	1.1 mm	584 mm	6	Vinyl, card and thin sheet
4.3 × 6 in (109 × 152 mm)	1.7 mm	876 mm	2	Vinyl, card and thin sheet
5.74 × 8 in (146 × 203 mm)	2.2 mm	1,168 mm	2	Vinyl, card and thin sheet
8.6 × 12 in (219 × 305 mm)	3.4 mm	1,753 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Japan SVG files

← Japan cut from a heart All 8 Japan designs Japan in stripes →