Free island SVG

Island outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Island outline, drawn as a line
Island outline. The preview is the SVG file itself.

The island as a line drawing: the hump of sand, a wavy water line and the sun as an arc going down behind the beach, with both palms left solid. For colouring pages and pen plotters.

What is in the file

Size100 × 65 mm (3.94 × 2.55 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut19: 1 outer edge and 18 cut-outs
Cut length900 mm at this size
Narrowest part1.7 mm at this size
Nodes432 curve and line segments

Measured from the file. PNG: 2,000 × 1,321 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.43 mm229 mm140Too fine for most machines
2 × 1.29 in (51 × 33 mm)0.86 mm457 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.94 in (76 × 49 mm)1.3 mm686 mm15Vinyl, card and thin sheet
4 × 2.59 in (102 × 66 mm)1.7 mm914 mm8Vinyl, card and thin sheet
6 × 3.88 in (152 × 99 mm)2.6 mm1,372 mm2Vinyl, card and thin sheet
8 × 5.18 in (203 × 131 mm)3.5 mm1,829 mm2Any material, including 3 mm wood and acrylic
12 × 7.76 in (305 × 197 mm)5.2 mm2,743 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More island SVG files

← Island ring frame with two palms All 13 islands Layered island in six colours →