Free Iowa SVG

Iowa with its name beneath SVG

Iowa with its name beneath, as a solid black shape — Iowa with its name beneath. The preview is the SVG file itself.

The solid state with “IOWA” in narrow capitals under it. The letters of “Iowa” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 86 mm (3.94 × 3.38 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	7: 5 outer edges and 2 cut-outs
Cut length	542 mm at this size
Narrowest part	1.9 mm at this size
Nodes	184 curve and line segments

Measured from the file. PNG: 2,000 × 1,729 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.86 in (25 × 22 mm)	0.48 mm	138 mm	110	Too fine for most machines
2 × 1.72 in (51 × 44 mm)	0.97 mm	275 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.58 in (76 × 65 mm)	1.4 mm	413 mm	12	Vinyl, card and thin sheet
4 × 3.44 in (102 × 87 mm)	1.9 mm	551 mm	6	Vinyl, card and thin sheet
6 × 5.15 in (152 × 131 mm)	2.9 mm	826 mm	2	Vinyl, card and thin sheet
8 × 6.87 in (203 × 175 mm)	3.9 mm	1,101 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.31 in (305 × 262 mm)	5.8 mm	1,652 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Iowa SVG files

← Iowa cut from a heart All 10 Iowa designs Split Iowa for a name →