Arched lace invitation on a coloured backing SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two flat layers with a round top: a backing 127 by 178 mm, which is 5 by 7 inches, and a panel 3 mm smaller all round with a fan of seven petals at head and foot. Print the wording in the clear middle, then glue the panel on. Cut the file 178 mm tall.
What is in the file
| Size | 71 × 100 mm (2.81 × 3.94 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 34: 2 outer edges and 32 cut-outs |
| Cut length | 1,134 mm at this size |
| Narrowest part | Nothing narrower than 6 mm at this size |
| Nodes | 182 curve and line segments |
| Layers | 2: backing and lace panel |
Measured from the file. PNG: 1,448 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.71 × 1 in (18 × 25 mm) | Over 1.5 mm | 288 mm | 130 | Vinyl, card and thin sheet |
| 1.43 × 2 in (36 × 51 mm) | Over 3 mm | 576 mm | 35 | Any material, including 3 mm wood and acrylic |
| 2.14 × 3 in (54 × 76 mm) | Over 4.6 mm | 864 mm | 15 | Any material, including 3 mm wood and acrylic |
| 2.85 × 4 in (72 × 102 mm) | Over 6.1 mm | 1,152 mm | 6 | Any material, including 3 mm wood and acrylic |
| 4.28 × 6 in (109 × 152 mm) | Over 9.1 mm | 1,728 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.7 × 8 in (145 × 203 mm) | Over 12 mm | 2,304 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.56 × 12 in (217 × 305 mm) | Over 18 mm | 3,456 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More invitation SVG files
-
Pocketfold invitation with a curved flap Solid · one piece -
Square gatefold invitation with a tree Solid · one piece -
Lace gatefold wedding invitation Solid · one piece -
Belly band for an invitation Solid · one piece -
Reply card for a wedding invitation Solid · one piece -
Envelope liner for an invitation Solid · one piece -
Lace trifold invitation Solid · one piece -
Petal envelope invitation Solid · one piece
← Pocketfold invitation template to print and cut All 12 invitations Pocketfold invitation with a curved flap →