Free In a World Full of Grandmas Be a Nana SVG

Be a Nana outline lettering SVG

Be a Nana outline lettering, drawn as a line
Be a Nana outline lettering. The preview is the SVG file itself.

“In a World Full of Grandmas Be a Nana” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 38 mm (3.94 × 1.51 in), scales to any size
Pieces31 separate pieces
Outlines to cut90: 31 outer edges and 59 cut-outs
Cut length1,621 mm at this size
Narrowest part0.9 mm at this size
Nodes805 curve and line segments

Measured from the file. PNG: 2,000 × 813 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.38 in (25 × 10 mm)0.23 mm412 mm200Too fine for most machines
2 × 0.77 in (51 × 19 mm)0.46 mm823 mm60Too fine for most machines
3 × 1.15 in (76 × 29 mm)0.69 mm1,235 mm27Fine detail: vinyl and paper only, weed with care
4 × 1.53 in (102 × 39 mm)0.91 mm1,647 mm14Fine detail: vinyl and paper only, weed with care
6 × 2.3 in (152 × 58 mm)1.4 mm2,470 mm4Vinyl, card and thin sheet
8 × 3.06 in (203 × 78 mm)1.8 mm3,294 mm3Vinyl, card and thin sheet
12 × 4.6 in (305 × 117 mm)2.7 mm4,941 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More In a World Full of Grandmas Be a Nana SVG files

← Be a Nana with hearts All 10 In a World Full of Grandmas Be a Nana designs Be a Nana stencil plate →