Free I’ll Be Gnome for Christmas SVG

Gnome for Christmas in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Gnome for Christmas in Lilita One, as a solid black shape
Gnome for Christmas in Lilita One. The preview is the SVG file itself.

“I’ll Be Gnome for Christmas” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 66 mm (3.94 × 2.61 in), scales to any size
Pieces24 separate pieces
Outlines to cut31: 24 outer edges and 7 cut-outs
Cut length1,210 mm at this size
Narrowest part2.4 mm at this size
Nodes411 curve and line segments

Measured from the file. PNG: 2,000 × 1,350 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.66 in (25 × 17 mm)0.61 mm307 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.32 in (51 × 34 mm)1.2 mm615 mm40Vinyl, card and thin sheet
3 × 1.99 in (76 × 50 mm)1.8 mm922 mm15Vinyl, card and thin sheet
4 × 2.65 in (102 × 67 mm)2.4 mm1,229 mm8Vinyl, card and thin sheet
6 × 3.97 in (152 × 101 mm)3.7 mm1,844 mm2Any material, including 3 mm wood and acrylic
8 × 5.3 in (203 × 135 mm)4.9 mm2,459 mm2Any material, including 3 mm wood and acrylic
12 × 7.94 in (305 × 202 mm)7.3 mm3,688 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’ll Be Gnome for Christmas SVG files

← Gnome for Christmas in Kaushan Script All 13 I’ll Be Gnome for Christmas designs Gnome for Christmas in Alfa Slab One →