Stir It It’s Homemade with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“If I Have to Stir It It’s Homemade” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 66 mm (3.94 × 2.58 in), scales to any size |
|---|---|
| Pieces | 20 separate pieces |
| Outlines to cut | 49: 20 outer edges and 29 cut-outs |
| Cut length | 1,976 mm at this size |
| Narrowest part | 1.5 mm at this size |
| Nodes | 1,051 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,338 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.66 in (25 × 17 mm) | 0.38 mm | 502 mm | 140 | Too fine for most machines |
| 2 × 1.31 in (51 × 33 mm) | 0.76 mm | 1,004 mm | 40 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.97 in (76 × 50 mm) | 1.1 mm | 1,506 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.62 in (102 × 67 mm) | 1.5 mm | 2,008 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.94 in (152 × 100 mm) | 2.3 mm | 3,011 mm | 2 | Vinyl, card and thin sheet |
| 8 × 5.25 in (203 × 133 mm) | 3 mm | 4,015 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.87 in (305 × 200 mm) | 4.6 mm | 6,023 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More If I Have to Stir It It’s Homemade SVG files
-
Stir It It’s Homemade in Pacifico Solid · 16 pieces -
Stir It It’s Homemade in Lobster Solid · 18 pieces -
Stir It It’s Homemade in Kaushan Script Solid · 28 pieces -
Stir It It’s Homemade in Lilita One Solid · 28 pieces -
Stir It It’s Homemade in Alfa Slab One Solid · 27 pieces -
Stir It It’s Homemade in Amatic SC Solid · 27 pieces -
Stir It It’s Homemade in block capitals Solid · 27 pieces -
Stir It It’s Homemade in script and capitals Solid · 24 pieces
← Stir It It’s Homemade stencil plate All 12 If I Have to Stir It It’s Homemade designs Stir It It’s Homemade in Pacifico →