Free Iceland SVG

Split Iceland for a name SVG

Split Iceland for a name, as a solid black shape — Split Iceland for a name. The preview is the SVG file itself.

Iceland divided by a clear band 18 mm tall across its broadest part, for a family name, a town or a date set between the two halves. The halves of Iceland are loose pieces: line them up with transfer tape.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 69 mm (3.94 × 2.72 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	2 outlines
Cut length	514 mm at this size
Narrowest part	2.6 mm at this size
Nodes	449 curve and line segments

Measured from the file. PNG: 2,000 × 1,408 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.69 in (25 × 18 mm)	0.66 mm	131 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.38 in (51 × 35 mm)	1.3 mm	261 mm	35	Vinyl, card and thin sheet
3 × 2.08 in (76 × 53 mm)	2 mm	392 mm	15	Vinyl, card and thin sheet
4 × 2.77 in (102 × 70 mm)	2.6 mm	522 mm	8	Vinyl, card and thin sheet
6 × 4.15 in (152 × 105 mm)	4 mm	783 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.54 in (203 × 141 mm)	5.3 mm	1,044 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.3 in (305 × 211 mm)	7.9 mm	1,567 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Iceland SVG files

← Iceland with its name beneath All 10 Iceland designs Iceland in stripes →