I Go Where I’m Towed in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“I Go Where I’m Towed” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 38 mm (3.94 × 1.51 in), scales to any size |
|---|---|
| Pieces | 16 separate pieces |
| Outlines to cut | 22: 16 outer edges and 6 cut-outs |
| Cut length | 869 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 271 curve and line segments |
Measured from the file. PNG: 2,000 × 813 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.38 in (25 × 10 mm) | 0.61 mm | 221 mm | 200 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.77 in (51 × 19 mm) | 1.2 mm | 441 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.15 in (76 × 29 mm) | 1.8 mm | 662 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.53 in (102 × 39 mm) | 2.4 mm | 883 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.3 in (152 × 58 mm) | 3.7 mm | 1,324 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.06 in (203 × 78 mm) | 4.9 mm | 1,766 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.6 in (305 × 117 mm) | 7.3 mm | 2,649 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More I Go Where I’m Towed SVG files
-
I Go Where I’m Towed in Alfa Slab One Solid · 14 pieces
-
I Go Where I’m Towed in Amatic SC Solid · 16 pieces
-
I Go Where I’m Towed in block capitals Solid · 16 pieces
-
I Go Where I’m Towed in script and capitals Solid · 11 pieces
-
I Go Where I’m Towed with stars Solid · 18 pieces
-
I Go Where I’m Towed outline lettering Outline · 18 pieces
-
I Go Where I’m Towed stencil plate Solid · one piece
-
I Go Where I’m Towed with a drop shadow Layered · 15 pieces
← I Go Where I’m Towed in Kaushan Script All 13 I Go Where I’m Towed designs I Go Where I’m Towed in Alfa Slab One →