Free hummingbird SVG

Hovering hummingbird SVG

Hovering hummingbird, as a solid black shape
Hovering hummingbird. The preview is the SVG file itself.

A hummingbird hovering with both wings swept back, a needle bill, a fanned tail and a scaled throat. The lines between the feathers are cut, so the wings read as feathers and the bird still lifts in one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size92 × 100 mm (3.63 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut16: 1 outer edge and 15 cut-outs
Cut length909 mm at this size
Narrowest part2 mm at this size
Nodes271 curve and line segments

Measured from the file. PNG: 1,852 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.51 mm231 mm100Fine detail: vinyl and paper only, weed with care
1.85 × 2 in (47 × 51 mm)1 mm462 mm25Vinyl, card and thin sheet
2.77 × 3 in (70 × 76 mm)1.5 mm693 mm12Vinyl, card and thin sheet
3.69 × 4 in (94 × 102 mm)2 mm924 mm6Vinyl, card and thin sheet
5.54 × 6 in (141 × 152 mm)3 mm1,385 mm2Any material, including 3 mm wood and acrylic
7.38 × 8 in (188 × 203 mm)4.1 mm1,847 mm1Any material, including 3 mm wood and acrylic
11.08 × 12 in (281 × 305 mm)6.1 mm2,771 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More hummingbird SVG files

← Layered hummingbird in four colours All 12 hummingbirds Hummingbird silhouette →