Free Hawaii SVG

Hawaii with its name beneath SVG

Hawaii with its name beneath, as a solid black shape — Hawaii with its name beneath. The preview is the SVG file itself.

The solid state with “HAWAII” in narrow capitals under it. The letters of “Hawaii” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 86 mm (3.94 × 3.37 in), scales to any size
Pieces	14 separate pieces
Outlines to cut	16: 14 outer edges and 2 cut-outs
Cut length	545 mm at this size
Narrowest part	1.8 mm at this size
Nodes	259 curve and line segments

Measured from the file. PNG: 2,000 × 1,723 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.86 in (25 × 22 mm)	0.46 mm	138 mm	110	Too fine for most machines
2 × 1.71 in (51 × 43 mm)	0.91 mm	277 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.57 in (76 × 65 mm)	1.4 mm	415 mm	12	Vinyl, card and thin sheet
4 × 3.42 in (102 × 87 mm)	1.8 mm	554 mm	6	Vinyl, card and thin sheet
6 × 5.14 in (152 × 130 mm)	2.7 mm	831 mm	2	Vinyl, card and thin sheet
8 × 6.85 in (203 × 174 mm)	3.7 mm	1,107 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.27 in (305 × 261 mm)	5.5 mm	1,661 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Hawaii SVG files

← Hawaii cut from a heart All 9 Hawaii designs Hawaii in stripes →