Free Happy Valentines Day SVG

Happy Valentines Day in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Valentines Day in Lobster, as a solid black shape
Happy Valentines Day in Lobster. The preview is the SVG file itself.

“Happy Valentines Day” set in Lobster, a bold upright script, on 3 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 93 mm (3.94 × 3.66 in), scales to any size
Pieces9 separate pieces
Outlines to cut19: 9 outer edges and 10 cut-outs
Cut length1,303 mm at this size
Narrowest part0.9 mm at this size
Nodes360 curve and line segments

Measured from the file. PNG: 2,000 × 1,865 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.23 mm331 mm100Too fine for most machines
2 × 1.86 in (51 × 47 mm)0.46 mm662 mm25Too fine for most machines
3 × 2.79 in (76 × 71 mm)0.69 mm993 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.72 in (102 × 94 mm)0.91 mm1,324 mm6Fine detail: vinyl and paper only, weed with care
6 × 5.58 in (152 × 142 mm)1.4 mm1,986 mm2Vinyl, card and thin sheet
8 × 7.44 in (203 × 189 mm)1.8 mm2,648 mm1Vinyl, card and thin sheet
12 × 11.16 in (305 × 283 mm)2.7 mm3,972 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Valentines Day SVG files

← Happy Valentines Day in Pacifico All 13 Happy Valentines Day designs Happy Valentines Day in Kaushan Script →