Free Happy New Year SVG

Happy New Year in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy New Year in Amatic SC, as a solid black shape
Happy New Year in Amatic SC. The preview is the SVG file itself.

“Happy New Year” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size100 × 79 mm (3.94 × 3.11 in), scales to any size
Pieces12 separate pieces
Outlines to cut17: 12 outer edges and 5 cut-outs
Cut length1,365 mm at this size
Narrowest part1.2 mm at this size
Nodes450 curve and line segments

Measured from the file. PNG: 2,000 × 1,596 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.79 in (25 × 20 mm)0.3 mm347 mm120Too fine for most machines
2 × 1.58 in (51 × 40 mm)0.61 mm693 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.37 in (76 × 60 mm)0.91 mm1,040 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.16 in (102 × 80 mm)1.2 mm1,387 mm6Vinyl, card and thin sheet
6 × 4.74 in (152 × 120 mm)1.8 mm2,080 mm2Vinyl, card and thin sheet
8 × 6.32 in (203 × 161 mm)2.4 mm2,774 mm1Vinyl, card and thin sheet
12 × 9.48 in (305 × 241 mm)3.7 mm4,161 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy New Year SVG files

← Happy New Year in Alfa Slab One All 13 Happy New Year designs Happy New Year in block capitals →