Free gymnastics SVG

Gymnastics bridge kickover SVG

Gymnastics bridge kickover, as a solid black shape
Gymnastics bridge kickover. The preview is the SVG file itself.

A back bridge on a strip of floor with one leg kicking up towards the ceiling, the start of a kickover. The hair hangs down between the arms. For tumbling class certificates and badges.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size86 × 100 mm (3.38 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length602 mm at this size
Narrowest part3 mm at this size
Nodes144 curve and line segments

Measured from the file. PNG: 1,729 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.86 × 1 in (22 × 25 mm)0.76 mm153 mm110Fine detail: vinyl and paper only, weed with care
1.72 × 2 in (44 × 51 mm)1.5 mm306 mm30Vinyl, card and thin sheet
2.58 × 3 in (65 × 76 mm)2.3 mm459 mm12Vinyl, card and thin sheet
3.44 × 4 in (87 × 102 mm)3 mm612 mm6Any material, including 3 mm wood and acrylic
5.15 × 6 in (131 × 152 mm)4.6 mm917 mm2Any material, including 3 mm wood and acrylic
6.87 × 8 in (175 × 203 mm)6.1 mm1,223 mm1Any material, including 3 mm wood and acrylic
10.31 × 12 in (262 × 305 mm)9.1 mm1,835 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More gymnastics SVG files

← Gymnastics leg hold silhouette All 16 gymnastics designs Still rings in men’s gymnastics →