Free Gym Hair Don’t Care SVG

Gym Hair Don’t Care in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Gym Hair Don’t Care in Lilita One, as a solid black shape
Gym Hair Don’t Care in Lilita One. The preview is the SVG file itself.

“Gym Hair Don’t Care” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 41 mm (3.94 × 1.6 in), scales to any size
Pieces17 separate pieces
Outlines to cut22: 17 outer edges and 5 cut-outs
Cut length852 mm at this size
Narrowest part2.3 mm at this size
Nodes286 curve and line segments

Measured from the file. PNG: 2,000 × 860 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)0.58 mm216 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.81 in (51 × 21 mm)1.2 mm433 mm60Vinyl, card and thin sheet
3 × 1.22 in (76 × 31 mm)1.8 mm649 mm24Vinyl, card and thin sheet
4 × 1.63 in (102 × 41 mm)2.3 mm866 mm12Vinyl, card and thin sheet
6 × 2.44 in (152 × 62 mm)3.5 mm1,298 mm4Any material, including 3 mm wood and acrylic
8 × 3.26 in (203 × 83 mm)4.7 mm1,731 mm3Any material, including 3 mm wood and acrylic
12 × 4.88 in (305 × 124 mm)7 mm2,597 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Gym Hair Don’t Care SVG files

← Gym Hair Don’t Care in Kaushan Script All 13 Gym Hair Don’t Care designs Gym Hair Don’t Care in Alfa Slab One →