Free Grill Master SVG

Grill Master stencil plate SVG

Grill Master stencil plate, as a solid black shape — Grill Master stencil plate. The preview is the SVG file itself.

A rounded plate with “GRILL MASTER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 75 mm (3.94 × 2.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	12: 1 outer edge and 11 cut-outs
Cut length	1,386 mm at this size
Narrowest part	1.2 mm at this size
Nodes	264 curve and line segments

Measured from the file. PNG: 2,000 × 1,515 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.75 in (25 × 19 mm)	0.3 mm	352 mm	120	Too fine for most machines
2 × 1.5 in (51 × 38 mm)	0.61 mm	704 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.24 in (76 × 57 mm)	0.91 mm	1,056 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 2.99 in (102 × 76 mm)	1.2 mm	1,408 mm	6	Vinyl, card and thin sheet
6 × 4.49 in (152 × 114 mm)	1.8 mm	2,112 mm	2	Vinyl, card and thin sheet
8 × 5.98 in (203 × 152 mm)	2.4 mm	2,816 mm	1	Vinyl, card and thin sheet
12 × 8.98 in (305 × 228 mm)	3.7 mm	4,225 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Grill Master SVG files

← Grill Master outline lettering All 12 Grill Master designs Grill Master with a drop shadow →