Free Gobble Gobble SVG

Gobble Gobble in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Gobble Gobble in Alfa Slab One, as a solid black shape
Gobble Gobble in Alfa Slab One. The preview is the SVG file itself.

“Gobble Gobble” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 55 mm (3.94 × 2.17 in), scales to any size
Pieces12 separate pieces
Outlines to cut20: 12 outer edges and 8 cut-outs
Cut length1,034 mm at this size
Narrowest part3.1 mm at this size
Nodes237 curve and line segments

Measured from the file. PNG: 2,000 × 1,135 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.55 in (25 × 14 mm)0.79 mm263 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.1 in (51 × 28 mm)1.6 mm525 mm45Vinyl, card and thin sheet
3 × 1.65 in (76 × 42 mm)2.4 mm788 mm18Vinyl, card and thin sheet
4 × 2.2 in (102 × 56 mm)3.1 mm1,051 mm10Any material, including 3 mm wood and acrylic
6 × 3.3 in (152 × 84 mm)4.7 mm1,576 mm3Any material, including 3 mm wood and acrylic
8 × 4.4 in (203 × 112 mm)6.3 mm2,101 mm2Any material, including 3 mm wood and acrylic
12 × 6.6 in (305 × 168 mm)9.4 mm3,152 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Gobble Gobble SVG files

← Gobble Gobble in Lilita One All 13 Gobble Gobble designs Gobble Gobble in Amatic SC →