Gnome for the Holidays in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Gnome for the Holidays” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 38 mm (3.94 × 1.48 in), scales to any size |
|---|---|
| Pieces | 20 separate pieces |
| Outlines to cut | 27: 20 outer edges and 7 cut-outs |
| Cut length | 862 mm at this size |
| Narrowest part | 2 mm at this size |
| Nodes | 318 curve and line segments |
Measured from the file. PNG: 2,000 × 798 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.38 in (25 × 10 mm) | 0.51 mm | 219 mm | 210 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.75 in (51 × 19 mm) | 1 mm | 438 mm | 60 | Vinyl, card and thin sheet |
| 3 × 1.13 in (76 × 29 mm) | 1.5 mm | 657 mm | 27 | Vinyl, card and thin sheet |
| 4 × 1.5 in (102 × 38 mm) | 2 mm | 876 mm | 14 | Vinyl, card and thin sheet |
| 6 × 2.25 in (152 × 57 mm) | 3 mm | 1,314 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3 in (203 × 76 mm) | 4.1 mm | 1,752 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.5 in (305 × 114 mm) | 6.1 mm | 2,627 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Gnome for the Holidays SVG files
-
Gnome for the Holidays in Alfa Slab One Solid · 20 pieces
-
Gnome for the Holidays in Amatic SC Solid · 19 pieces
-
Gnome for the Holidays in block capitals Solid · 19 pieces
-
Gnome for the Holidays in script and capitals Solid · 13 pieces
-
Gnome for the Holidays with stars Solid · 14 pieces
-
Gnome for the Holidays outline lettering Outline · 23 pieces
-
Gnome for the Holidays stencil plate Solid · one piece
-
Gnome for the Holidays with a drop shadow Layered · 9 pieces
← Gnome for the Holidays in Kaushan Script All 13 Gnome for the Holidays designs Gnome for the Holidays in Alfa Slab One →