Free Get Naked SVG

Get Naked in Amatic SC SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Get Naked in Amatic SC, as a solid black shape
Get Naked in Amatic SC. The preview is the SVG file itself.

“Get Naked” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

What is in the file

Size84 × 100 mm (3.31 × 3.94 in), scales to any size
Pieces8 separate pieces
Outlines to cut10: 8 outer edges and 2 cut-outs
Cut length1,128 mm at this size
Narrowest part2.2 mm at this size
Nodes317 curve and line segments

Measured from the file. PNG: 1,696 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)0.56 mm287 mm110Fine detail: vinyl and paper only, weed with care
1.68 × 2 in (43 × 51 mm)1.1 mm573 mm30Vinyl, card and thin sheet
2.53 × 3 in (64 × 76 mm)1.7 mm860 mm12Vinyl, card and thin sheet
3.37 × 4 in (86 × 102 mm)2.2 mm1,146 mm6Vinyl, card and thin sheet
5.05 × 6 in (128 × 152 mm)3.4 mm1,719 mm2Any material, including 3 mm wood and acrylic
6.74 × 8 in (171 × 203 mm)4.5 mm2,292 mm1Any material, including 3 mm wood and acrylic
10.1 × 12 in (257 × 305 mm)6.7 mm3,438 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Get Naked SVG files

← Get Naked in Alfa Slab One All 13 Get Naked designs Get Naked in block capitals →