Free Georgia SVG

Georgia with its name beneath SVG

Georgia with its name beneath, as a solid black shape — Georgia with its name beneath. The preview is the SVG file itself.

The solid state with “GEORGIA” in narrow capitals under it. The letters of “Georgia” are loose pieces, so use transfer tape to keep their spacing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	70 × 100 mm (2.76 × 3.94 in), scales to any size
Pieces	8 separate pieces
Outlines to cut	11: 8 outer edges and 3 cut-outs
Cut length	592 mm at this size
Narrowest part	1.8 mm at this size
Nodes	295 curve and line segments

Measured from the file. PNG: 1,425 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.7 × 1 in (18 × 25 mm)	0.46 mm	150 mm	130	Too fine for most machines
1.4 × 2 in (36 × 51 mm)	0.91 mm	301 mm	35	Fine detail: vinyl and paper only, weed with care
2.1 × 3 in (53 × 76 mm)	1.4 mm	451 mm	15	Vinyl, card and thin sheet
2.8 × 4 in (71 × 102 mm)	1.8 mm	601 mm	8	Vinyl, card and thin sheet
4.21 × 6 in (107 × 152 mm)	2.7 mm	902 mm	2	Vinyl, card and thin sheet
5.61 × 8 in (142 × 203 mm)	3.7 mm	1,203 mm	2	Any material, including 3 mm wood and acrylic
8.41 × 12 in (214 × 305 mm)	5.5 mm	1,804 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Georgia SVG files

← Georgia cut from a heart All 10 Georgia designs Split Georgia for a name →