Free France SVG

France in stripes SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

France in stripes, as a solid black shape
France in stripes. The preview is the SVG file itself.

France drawn as bands 5 mm tall with 3 mm between them. Cut the bands in one colour and lay them over the solid shape of France in another; the bands are loose pieces.

What is in the file

Size100 × 93 mm (3.94 × 3.67 in), scales to any size
Pieces15 separate pieces
Outlines to cut15 outlines
Cut length1,239 mm at this size
Narrowest part1.3 mm at this size
Nodes271 curve and line segments

Measured from the file. PNG: 2,000 × 1,867 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 24 mm)0.33 mm315 mm100Too fine for most machines
2 × 1.86 in (51 × 47 mm)0.66 mm629 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.79 in (76 × 71 mm)0.99 mm944 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.72 in (102 × 95 mm)1.3 mm1,259 mm6Vinyl, card and thin sheet
6 × 5.59 in (152 × 142 mm)2 mm1,888 mm2Vinyl, card and thin sheet
8 × 7.45 in (203 × 189 mm)2.6 mm2,518 mm1Vinyl, card and thin sheet
12 × 11.17 in (305 × 284 mm)4 mm3,776 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More France SVG files

← Split France for a name All 10 France designs Layered France on an octagon →