Free footprint SVG

Footprint outline pair SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Footprint outline pair, drawn as a line
Footprint outline pair. The preview is the SVG file itself.

Both prints drawn as an even line: the edge of each sole and a ring for every toe. Twelve loose rings by design, for colouring pages, foil and pen plotters, or as a guide for painting round a real foot.

What is in the file

Size100 × 92 mm (3.94 × 3.61 in), scales to any size
Pieces12 separate pieces
Outlines to cut24: 12 outer edges and 12 cut-outs
Cut length1,201 mm at this size
Narrowest part1.9 mm at this size
Nodes250 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,838 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.92 in (25 × 23 mm)0.48 mm305 mm100Too fine for most machines
2 × 1.83 in (51 × 47 mm)0.97 mm610 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.75 in (76 × 70 mm)1.4 mm915 mm12Vinyl, card and thin sheet
4 × 3.66 in (102 × 93 mm)1.9 mm1,220 mm6Vinyl, card and thin sheet
6 × 5.5 in (152 × 140 mm)2.9 mm1,830 mm2Vinyl, card and thin sheet
8 × 7.33 in (203 × 186 mm)3.9 mm2,440 mm1Any material, including 3 mm wood and acrylic
12 × 10.99 in (305 × 279 mm)5.8 mm3,661 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More footprint SVG files

← Footprints walking round a ring All 15 footprints Layered footprints on a beach circle →