Free Follow Your Dreams SVG

Follow Your Dreams in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Follow Your Dreams in Alfa Slab One, as a solid black shape
Follow Your Dreams in Alfa Slab One. The preview is the SVG file itself.

“Follow Your Dreams” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 29 mm (3.94 × 1.14 in), scales to any size
Pieces16 separate pieces
Outlines to cut22: 16 outer edges and 6 cut-outs
Cut length722 mm at this size
Narrowest part1.3 mm at this size
Nodes274 curve and line segments

Measured from the file. PNG: 2,000 × 635 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.29 in (25 × 7 mm)0.33 mm183 mm240Too fine for most machines
2 × 0.58 in (51 × 15 mm)0.66 mm367 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.87 in (76 × 22 mm)0.99 mm550 mm33Fine detail: vinyl and paper only, weed with care
4 × 1.16 in (102 × 29 mm)1.3 mm734 mm16Vinyl, card and thin sheet
6 × 1.74 in (152 × 44 mm)2 mm1,100 mm6Vinyl, card and thin sheet
8 × 2.32 in (203 × 59 mm)2.6 mm1,467 mm4Vinyl, card and thin sheet
12 × 3.48 in (305 × 88 mm)4 mm2,201 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Follow Your Dreams SVG files

← Follow Your Dreams in Lilita One All 13 Follow Your Dreams designs Follow Your Dreams in Amatic SC →