Free First We Had Each Other SVG

First We Had Each Other stencil plate SVG

First We Had Each Other stencil plate, as a solid black shape
First We Had Each Other stencil plate. The preview is the SVG file itself.

A rounded plate with “FIRST WE HAD EACH OTHER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 48 mm (3.94 × 1.88 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut20: 1 outer edge and 19 cut-outs
Cut length1,185 mm at this size
Narrowest part1.3 mm at this size
Nodes375 curve and line segments

Measured from the file. PNG: 2,000 × 994 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.33 mm301 mm180Too fine for most machines
2 × 0.95 in (51 × 24 mm)0.66 mm602 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.43 in (76 × 36 mm)0.99 mm903 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.91 in (102 × 48 mm)1.3 mm1,204 mm10Vinyl, card and thin sheet
6 × 2.86 in (152 × 73 mm)2 mm1,806 mm3Vinyl, card and thin sheet
8 × 3.82 in (203 × 97 mm)2.6 mm2,408 mm3Vinyl, card and thin sheet
12 × 5.72 in (305 × 145 mm)4 mm3,612 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More First We Had Each Other SVG files

← First We Had Each Other outline lettering All 12 First We Had Each Other designs First We Had Each Other with a drop shadow →