Free eucalyptus SVG

Layered eucalyptus in three greens SVG

Layered eucalyptus in three greens, in layered colours
Layered eucalyptus in three greens. The preview is the SVG file itself.

Three layers to stack: the whole sprig in deep green as a base, then the leaves of one side in sage and those of the other in pale grey-green. The base shows as a dark edge round every leaf.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size50 × 100 mm (1.97 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut19: 11 outer edges and 8 cut-outs
Cut length883 mm at this size
Narrowest part4.2 mm at this size
Nodes272 curve and line segments
Layers3: base, sage leaves and pale leaves

Measured from the file. PNG: 1,040 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.5 × 1 in (13 × 25 mm)1.1 mm224 mm170Vinyl, card and thin sheet
1 × 2 in (25 × 51 mm)2.1 mm449 mm50Vinyl, card and thin sheet
1.5 × 3 in (38 × 76 mm)3.2 mm673 mm21Any material, including 3 mm wood and acrylic
2 × 4 in (51 × 102 mm)4.3 mm897 mm10Any material, including 3 mm wood and acrylic
3.01 × 6 in (76 × 152 mm)6.4 mm1,346 mm3Any material, including 3 mm wood and acrylic
4.01 × 8 in (102 × 203 mm)8.5 mm1,794 mm2Any material, including 3 mm wood and acrylic
6.01 × 12 in (153 × 305 mm)13 mm2,691 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More eucalyptus SVG files

← Eucalyptus silhouette All 15 eucalyptus sprigs Silver dollar eucalyptus sprig →