Layered Easter card with a bunny in an egg window SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
Two colours: a side-fold card with an egg-shaped window in the front and four daisies round it, and a rabbit sitting on a strip of ground to glue behind the window so that it sits in the egg. Cut 216 mm wide the card folds to 4.25 × 5.5 inches (A2).
What is in the file
| Size | 100 × 65 mm (3.94 × 2.55 in), scales to any size |
|---|---|
| Pieces | 2 separate pieces |
| Outlines to cut | 19: 2 outer edges and 17 cut-outs |
| Cut length | 867 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 256 curve and line segments |
| Layers | 2: bunny and card |
Measured from the file. PNG: 2,000 × 1,321 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.65 in (25 × 16 mm) | 0.81 mm | 220 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.29 in (51 × 33 mm) | 1.6 mm | 440 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.94 in (76 × 49 mm) | 2.4 mm | 661 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.59 in (102 × 66 mm) | 3.3 mm | 881 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.88 in (152 × 99 mm) | 4.9 mm | 1,321 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.18 in (203 × 131 mm) | 6.5 mm | 1,762 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.76 in (305 × 197 mm) | 9.8 mm | 2,643 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Easter card SVG files
-
Easter card with a bunny Solid · one piece -
Happy Easter card with three eggs Solid · one piece -
Easter card shaped like an egg Solid · one piece -
Tall Easter card with a cross and tulips Solid · one piece -
Square Easter card with tulips and a butterfly Solid · one piece -
Small Easter card with a chick Solid · one piece -
Gate fold Easter card with a cracked edge Solid · one piece -
Easter card with five eggs and a liner Solid · 2 pieces
← Easter card template to print and cut by hand All 11 Easter cards Easter card with a bunny →