Free dove SVG

Descending dove in a ring SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Descending dove in a ring, as a solid black shape
Descending dove in a ring. The preview is the SVG file itself.

A dove coming straight down with its wings spread, held inside a ring with four short rays below it. Mirror symmetrical, for confirmation, Pentecost and baptism projects.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut19: 1 outer edge and 18 cut-outs
Cut length1,432 mm at this size
Narrowest part1.8 mm at this size
Nodes282 curve and line segments
SymmetryMirror
Also found asSilhouette holy spirit dove SVG

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.46 mm364 mm100Too fine for most machines
2 × 2 in (51 × 51 mm)0.91 mm727 mm25Fine detail: vinyl and paper only, weed with care
3 × 3 in (76 × 76 mm)1.4 mm1,091 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)1.8 mm1,455 mm4Vinyl, card and thin sheet
6 × 6 in (152 × 152 mm)2.7 mm2,182 mm1Vinyl, card and thin sheet
8 × 8 in (203 × 203 mm)3.7 mm2,910 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)5.5 mm4,365 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More dove SVG files

← Peace dove with an olive branch All 12 doves Cross with a dove →