Don’t Look Back in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Don’t Look Back You’re Not Going That Way” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 46 mm (3.94 × 1.8 in), scales to any size |
|---|---|
| Pieces | 35 separate pieces |
| Outlines to cut | 49: 35 outer edges and 14 cut-outs |
| Cut length | 1,189 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 488 curve and line segments |
Measured from the file. PNG: 2,000 × 956 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.46 in (25 × 12 mm) | 0.41 mm | 302 mm | 180 | Too fine for most machines |
| 2 × 0.91 in (51 × 23 mm) | 0.81 mm | 604 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.37 in (76 × 35 mm) | 1.2 mm | 906 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.83 in (102 × 46 mm) | 1.6 mm | 1,208 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.74 in (152 × 70 mm) | 2.4 mm | 1,812 mm | 4 | Vinyl, card and thin sheet |
| 8 × 3.66 in (203 × 93 mm) | 3.3 mm | 2,416 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.48 in (305 × 139 mm) | 4.9 mm | 3,624 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Don’t Look Back You’re Not Going That Way SVG files
-
Don’t Look Back in Amatic SC Solid · 34 pieces
-
Don’t Look Back in block capitals Solid · 34 pieces
-
Don’t Look Back in script and capitals Solid · 28 pieces
-
Don’t Look Back with stars Solid · 20 pieces
-
Don’t Look Back outline lettering Outline · 42 pieces
-
Don’t Look Back stencil plate Solid · one piece
-
Don’t Look Back with a drop shadow Layered · 22 pieces
-
Don’t Look Back with a star Solid · 29 pieces
← Don’t Look Back in Lobster All 11 Don’t Look Back You’re Not Going That Way designs Don’t Look Back in Amatic SC →