Free Dog Mom SVG

Dog Mom stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dog Mom stencil plate, as a solid black shape
Dog Mom stencil plate. The preview is the SVG file itself.

A rounded plate with “DOG MOM” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size93 × 100 mm (3.65 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut7: 1 outer edge and 6 cut-outs
Cut length1,568 mm at this size
Narrowest part1.6 mm at this size
Nodes170 curve and line segments

Measured from the file. PNG: 1,862 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.93 × 1 in (24 × 25 mm)0.41 mm398 mm100Too fine for most machines
1.86 × 2 in (47 × 51 mm)0.81 mm797 mm25Fine detail: vinyl and paper only, weed with care
2.78 × 3 in (71 × 76 mm)1.2 mm1,195 mm12Vinyl, card and thin sheet
3.71 × 4 in (94 × 102 mm)1.6 mm1,593 mm6Vinyl, card and thin sheet
5.57 × 6 in (141 × 152 mm)2.4 mm2,390 mm2Vinyl, card and thin sheet
7.42 × 8 in (189 × 203 mm)3.3 mm3,186 mm1Any material, including 3 mm wood and acrylic
11.14 × 12 in (283 × 305 mm)4.9 mm4,779 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dog Mom SVG files

← Dog Mom outline lettering All 13 Dog Mom designs Dog Mom with a drop shadow →