Free Dear Santa I Was Framed SVG

Dear Santa I Was Framed in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dear Santa I Was Framed in Alfa Slab One, as a solid black shape
Dear Santa I Was Framed in Alfa Slab One. The preview is the SVG file itself.

“Dear Santa I Was Framed” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 27 mm (3.94 × 1.07 in), scales to any size
Pieces18 separate pieces
Outlines to cut27: 18 outer edges and 9 cut-outs
Cut length848 mm at this size
Narrowest part1.2 mm at this size
Nodes371 curve and line segments

Measured from the file. PNG: 2,000 × 602 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.27 in (25 × 7 mm)0.3 mm215 mm250Too fine for most machines
2 × 0.55 in (51 × 14 mm)0.61 mm431 mm80Fine detail: vinyl and paper only, weed with care
3 × 0.82 in (76 × 21 mm)0.91 mm646 mm33Fine detail: vinyl and paper only, weed with care
4 × 1.09 in (102 × 28 mm)1.2 mm862 mm18Vinyl, card and thin sheet
6 × 1.64 in (152 × 42 mm)1.8 mm1,292 mm6Vinyl, card and thin sheet
8 × 2.18 in (203 × 55 mm)2.4 mm1,723 mm5Vinyl, card and thin sheet
12 × 3.28 in (305 × 83 mm)3.7 mm2,585 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dear Santa I Was Framed SVG files

← Dear Santa I Was Framed in Lilita One All 13 Dear Santa I Was Framed designs Dear Santa I Was Framed in Amatic SC →