Free Dance Mom SVG

Dance Mom stencil plate SVG

Dance Mom stencil plate, as a solid black shape — Dance Mom stencil plate. The preview is the SVG file itself.

A rounded plate with “DANCE MOM” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 88 mm (3.94 × 3.46 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,663 mm at this size
Narrowest part	1.4 mm at this size
Nodes	135 curve and line segments

Measured from the file. PNG: 2,000 × 1,769 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.88 in (25 × 22 mm)	0.36 mm	422 mm	110	Too fine for most machines
2 × 1.76 in (51 × 45 mm)	0.71 mm	845 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.64 in (76 × 67 mm)	1.1 mm	1,267 mm	12	Vinyl, card and thin sheet
4 × 3.52 in (102 × 89 mm)	1.4 mm	1,690 mm	6	Vinyl, card and thin sheet
6 × 5.28 in (152 × 134 mm)	2.1 mm	2,534 mm	2	Vinyl, card and thin sheet
8 × 7.04 in (203 × 179 mm)	2.8 mm	3,379 mm	1	Vinyl, card and thin sheet
12 × 10.56 in (305 × 268 mm)	4.3 mm	5,069 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dance Mom SVG files

← Dance Mom outline lettering All 12 Dance Mom designs Dance Mom with a drop shadow →