Free Dad Life SVG

Dad Life stencil plate SVG

Dad Life stencil plate, as a solid black shape — Dad Life stencil plate. The preview is the SVG file itself.

A rounded plate with “DAD LIFE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	92 × 100 mm (3.64 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	1,408 mm at this size
Narrowest part	1.6 mm at this size
Nodes	87 curve and line segments

Measured from the file. PNG: 1,854 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.92 × 1 in (23 × 25 mm)	0.41 mm	358 mm	100	Too fine for most machines
1.85 × 2 in (47 × 51 mm)	0.81 mm	715 mm	25	Fine detail: vinyl and paper only, weed with care
2.77 × 3 in (70 × 76 mm)	1.2 mm	1,073 mm	12	Vinyl, card and thin sheet
3.7 × 4 in (94 × 102 mm)	1.6 mm	1,431 mm	6	Vinyl, card and thin sheet
5.54 × 6 in (141 × 152 mm)	2.4 mm	2,146 mm	2	Vinyl, card and thin sheet
7.39 × 8 in (188 × 203 mm)	3.3 mm	2,861 mm	1	Any material, including 3 mm wood and acrylic
11.09 × 12 in (282 × 305 mm)	4.9 mm	4,292 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Dad Life SVG files

← Dad Life outline lettering All 12 Dad Life designs Dad Life with a drop shadow →