Free Cuba SVG

Cuba cut from a square tile SVG

Cuba cut from a square tile, as a solid black shape
Cuba cut from a square tile. The preview is the SVG file itself.

A square tile with rounded corners, 100 mm each way, with Cuba cut out of it. Cut the tile from wood or acrylic for a trivet or a wall plaque, or use it as a stencil to paint Cuba on a bag or a board.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length592 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes293 curve and line segments

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)Over 1.5 mm150 mm100Vinyl, card and thin sheet
2 × 2 in (51 × 51 mm)Over 3 mm301 mm25Any material, including 3 mm wood and acrylic
3 × 3 in (76 × 76 mm)Over 4.6 mm451 mm9Any material, including 3 mm wood and acrylic
4 × 4 in (102 × 102 mm)Over 6.1 mm601 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)Over 9.1 mm902 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)Over 12 mm1,203 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)Over 18 mm1,804 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cuba SVG files

← Cuba cut from a disc All 8 Cuba designs Cuba cut from a heart →