Free Cousin Crew SVG

Cousin Crew stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cousin Crew stencil plate, as a solid black shape
Cousin Crew stencil plate. The preview is the SVG file itself.

A rounded plate with “COUSIN CREW” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 78 mm (3.94 × 3.07 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length1,481 mm at this size
Narrowest part1.7 mm at this size
Nodes236 curve and line segments

Measured from the file. PNG: 2,000 × 1,579 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.78 in (25 × 20 mm)0.43 mm376 mm120Too fine for most machines
2 × 1.56 in (51 × 40 mm)0.86 mm752 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.34 in (76 × 60 mm)1.3 mm1,129 mm12Vinyl, card and thin sheet
4 × 3.12 in (102 × 79 mm)1.7 mm1,505 mm6Vinyl, card and thin sheet
6 × 4.69 in (152 × 119 mm)2.6 mm2,257 mm2Vinyl, card and thin sheet
8 × 6.25 in (203 × 159 mm)3.5 mm3,009 mm1Any material, including 3 mm wood and acrylic
12 × 9.37 in (305 × 238 mm)5.2 mm4,514 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cousin Crew SVG files

← Cousin Crew outline lettering All 13 Cousin Crew designs Cousin Crew with a drop shadow →