Free color guard SVG

Color guard sabre SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Color guard sabre, as a solid black shape
Color guard sabre. The preview is the SVG file itself.

A guard sabre: a grip with a pommel, a cross guard, a bow that curves back to the pommel and a blade with a slight sweep, drawn level with the point to the right. One piece, long and narrow.

What is in the file

Size100 × 23 mm (3.94 × 0.9 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length261 mm at this size
Narrowest part2.4 mm at this size
Nodes58 curve and line segments

Measured from the file. PNG: 2,000 × 515 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.23 in (25 × 6 mm)0.61 mm66 mm280Fine detail: vinyl and paper only, weed with care
2 × 0.46 in (51 × 12 mm)1.2 mm133 mm90Vinyl, card and thin sheet
3 × 0.68 in (76 × 17 mm)1.8 mm199 mm39Vinyl, card and thin sheet
4 × 0.91 in (102 × 23 mm)2.4 mm265 mm20Vinyl, card and thin sheet
6 × 1.37 in (152 × 35 mm)3.7 mm398 mm7Any material, including 3 mm wood and acrylic
8 × 1.82 in (203 × 46 mm)4.9 mm530 mm6Any material, including 3 mm wood and acrylic
12 × 2.74 in (305 × 69 mm)7.3 mm796 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More color guard SVG files

← Color guard flags, crossed All 13 color guard designs Color guard sabres, crossed →