Free Coffee SVG

Coffee stencil plate SVG

Coffee stencil plate, as a solid black shape — Coffee stencil plate. The preview is the SVG file itself.

A rounded plate with “COFFEE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 39 mm (3.94 × 1.55 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	779 mm at this size
Narrowest part	1.7 mm at this size
Nodes	138 curve and line segments

Measured from the file. PNG: 2,000 × 833 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.39 in (25 × 10 mm)	0.43 mm	198 mm	200	Too fine for most machines
2 × 0.79 in (51 × 20 mm)	0.86 mm	396 mm	60	Fine detail: vinyl and paper only, weed with care
3 × 1.18 in (76 × 30 mm)	1.3 mm	594 mm	24	Vinyl, card and thin sheet
4 × 1.57 in (102 × 40 mm)	1.7 mm	791 mm	12	Vinyl, card and thin sheet
6 × 2.36 in (152 × 60 mm)	2.6 mm	1,187 mm	4	Vinyl, card and thin sheet
8 × 3.14 in (203 × 80 mm)	3.5 mm	1,583 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.72 in (305 × 120 mm)	5.2 mm	2,374 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Coffee SVG files

← Coffee outline lettering All 12 Coffee designs Coffee with a drop shadow →