Free church SVG

Church in the snow with fir trees SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Church in the snow with fir trees, as a solid black shape
Church in the snow with fir trees. The preview is the SVG file itself.

The steepled church standing in a snow drift between three fir trees, with a line of snow cut along each slope of the roof. For Christmas cards and lanterns.

What is in the file

Size100 × 99 mm (3.94 × 3.9 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length985 mm at this size
Narrowest part1 mm at this size
Nodes204 curve and line segments

Measured from the file. PNG: 2,000 × 1,981 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.99 in (25 × 25 mm)0.25 mm250 mm100Too fine for most machines
2 × 1.98 in (51 × 50 mm)0.51 mm500 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.97 in (76 × 75 mm)0.76 mm751 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.96 in (102 × 101 mm)1 mm1,001 mm4Vinyl, card and thin sheet
6 × 5.94 in (152 × 151 mm)1.5 mm1,501 mm1Vinyl, card and thin sheet
8 × 7.92 in (203 × 201 mm)2 mm2,002 mm1Vinyl, card and thin sheet
12 × 11.88 in (305 × 302 mm)3 mm3,002 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More church SVG files

← Wedding church with a heart window All 15 churches Church window with tracery →