Free Christmas Tree Farm SVG

Christmas Tree Farm outline lettering SVG

Christmas Tree Farm outline lettering, drawn as a line
Christmas Tree Farm outline lettering. The preview is the SVG file itself.

“Christmas Tree Farm” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 40 mm (3.94 × 1.59 in), scales to any size
Pieces18 separate pieces
Outlines to cut50: 18 outer edges and 32 cut-outs
Cut length1,500 mm at this size
Narrowest part1.3 mm at this size
Nodes582 curve and line segments

Measured from the file. PNG: 2,000 × 852 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.4 in (25 × 10 mm)0.33 mm381 mm200Too fine for most machines
2 × 0.81 in (51 × 20 mm)0.66 mm762 mm60Fine detail: vinyl and paper only, weed with care
3 × 1.21 in (76 × 31 mm)0.99 mm1,143 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.61 in (102 × 41 mm)1.3 mm1,524 mm12Vinyl, card and thin sheet
6 × 2.42 in (152 × 61 mm)2 mm2,286 mm4Vinyl, card and thin sheet
8 × 3.22 in (203 × 82 mm)2.6 mm3,048 mm3Vinyl, card and thin sheet
12 × 4.84 in (305 × 123 mm)4 mm4,572 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Christmas Tree Farm SVG files

← Christmas Tree Farm with stars All 12 Christmas Tree Farm designs Christmas Tree Farm stencil plate →