Free Chillin With My Gnomies SVG

Chillin With My Gnomies in script and capitals SVG

Chillin With My Gnomies in script and capitals, as a solid black shape
Chillin With My Gnomies in script and capitals. The preview is the SVG file itself.

“Chillin With” in Pacifico script over “MY GNOMIES” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 44 mm (3.94 × 1.71 in), scales to any size
Pieces14 separate pieces
Outlines to cut21: 14 outer edges and 7 cut-outs
Cut length1,497 mm at this size
Narrowest part1.3 mm at this size
Nodes367 curve and line segments

Measured from the file. PNG: 2,000 × 913 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.33 mm380 mm190Too fine for most machines
2 × 0.87 in (51 × 22 mm)0.66 mm760 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.31 in (76 × 33 mm)0.99 mm1,141 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.74 in (102 × 44 mm)1.3 mm1,521 mm12Vinyl, card and thin sheet
6 × 2.61 in (152 × 66 mm)2 mm2,281 mm4Vinyl, card and thin sheet
8 × 3.48 in (203 × 88 mm)2.6 mm3,042 mm3Vinyl, card and thin sheet
12 × 5.22 in (305 × 133 mm)4 mm4,563 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Chillin With My Gnomies SVG files

← Chillin With My Gnomies in block capitals All 12 Chillin With My Gnomies designs Chillin With My Gnomies with stars →