Free Chicks Dig Me SVG

Chicks Dig Me stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Chicks Dig Me stencil plate, as a solid black shape
Chicks Dig Me stencil plate. The preview is the SVG file itself.

A rounded plate with “CHICKS DIG ME” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 72 mm (3.94 × 2.81 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,387 mm at this size
Narrowest part1.7 mm at this size
Nodes248 curve and line segments

Measured from the file. PNG: 2,000 × 1,452 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.43 mm352 mm130Too fine for most machines
2 × 1.43 in (51 × 36 mm)0.86 mm705 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.14 in (76 × 54 mm)1.3 mm1,057 mm15Vinyl, card and thin sheet
4 × 2.86 in (102 × 73 mm)1.7 mm1,409 mm6Vinyl, card and thin sheet
6 × 4.29 in (152 × 109 mm)2.6 mm2,114 mm2Vinyl, card and thin sheet
8 × 5.72 in (203 × 145 mm)3.5 mm2,818 mm2Any material, including 3 mm wood and acrylic
12 × 8.58 in (305 × 218 mm)5.2 mm4,228 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Chicks Dig Me SVG files

← Chicks Dig Me outline lettering All 12 Chicks Dig Me designs Chicks Dig Me with a drop shadow →