Free Cheer Mom SVG

Cheer Mom stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cheer Mom stencil plate, as a solid black shape
Cheer Mom stencil plate. The preview is the SVG file itself.

A rounded plate with “CHEER MOM” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size100 × 89 mm (3.94 × 3.48 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length1,585 mm at this size
Narrowest part1.7 mm at this size
Nodes217 curve and line segments

Measured from the file. PNG: 2,000 × 1,779 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.89 in (25 × 22 mm)0.43 mm403 mm110Too fine for most machines
2 × 1.77 in (51 × 45 mm)0.86 mm805 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.66 in (76 × 67 mm)1.3 mm1,208 mm12Vinyl, card and thin sheet
4 × 3.54 in (102 × 90 mm)1.7 mm1,610 mm6Vinyl, card and thin sheet
6 × 5.31 in (152 × 135 mm)2.6 mm2,416 mm2Vinyl, card and thin sheet
8 × 7.08 in (203 × 180 mm)3.5 mm3,221 mm1Any material, including 3 mm wood and acrylic
12 × 10.62 in (305 × 270 mm)5.2 mm4,831 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cheer Mom SVG files

← Cheer Mom outline lettering All 13 Cheer Mom designs Cheer Mom with a drop shadow →