Free Cheer Life SVG

Cheer Life in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cheer Life in Alfa Slab One, as a solid black shape
Cheer Life in Alfa Slab One. The preview is the SVG file itself.

“Cheer Life” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 65 mm (3.94 × 2.55 in), scales to any size
Pieces10 separate pieces
Outlines to cut13: 10 outer edges and 3 cut-outs
Cut length882 mm at this size
Narrowest part3.4 mm at this size
Nodes163 curve and line segments

Measured from the file. PNG: 2,000 × 1,323 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.65 in (25 × 16 mm)0.86 mm224 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.3 in (51 × 33 mm)1.7 mm448 mm40Vinyl, card and thin sheet
3 × 1.94 in (76 × 49 mm)2.6 mm672 mm15Vinyl, card and thin sheet
4 × 2.59 in (102 × 66 mm)3.5 mm896 mm8Any material, including 3 mm wood and acrylic
6 × 3.89 in (152 × 99 mm)5.2 mm1,344 mm2Any material, including 3 mm wood and acrylic
8 × 5.18 in (203 × 132 mm)6.9 mm1,792 mm2Any material, including 3 mm wood and acrylic
12 × 7.78 in (305 × 198 mm)10 mm2,688 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Cheer Life SVG files

← Cheer Life in Lilita One All 13 Cheer Life designs Cheer Life in Amatic SC →