Free Chaos Coordinator SVG

Chaos Coordinator stencil plate SVG

Chaos Coordinator stencil plate, as a solid black shape
Chaos Coordinator stencil plate. The preview is the SVG file itself.

A rounded plate with “CHAOS COORDINATOR” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 61 mm (3.94 × 2.41 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length1,369 mm at this size
Narrowest part1.5 mm at this size
Nodes325 curve and line segments

Measured from the file. PNG: 2,000 × 1,252 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.61 in (25 × 16 mm)0.38 mm348 mm150Too fine for most machines
2 × 1.22 in (51 × 31 mm)0.76 mm695 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.83 in (76 × 47 mm)1.1 mm1,043 mm18Vinyl, card and thin sheet
4 × 2.44 in (102 × 62 mm)1.5 mm1,391 mm8Vinyl, card and thin sheet
6 × 3.67 in (152 × 93 mm)2.3 mm2,086 mm3Vinyl, card and thin sheet
8 × 4.89 in (203 × 124 mm)3 mm2,782 mm2Any material, including 3 mm wood and acrylic
12 × 7.33 in (305 × 186 mm)4.6 mm4,173 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Chaos Coordinator SVG files

← Chaos Coordinator outline lettering All 12 Chaos Coordinator designs Chaos Coordinator with a drop shadow →