Champagne cork with a wire cage SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The cork after it comes out: a round head under a small metal cap, a narrow waist with a twisted wire band and its loop, and a flared base. The wires of the cage and the grain of the cork are slots.
What is in the file
| Size | 52 × 100 mm (2.03 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 691 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 124 curve and line segments |
Measured from the file. PNG: 1,067 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.52 × 1 in (13 × 25 mm) | 0.66 mm | 176 mm | 170 | Fine detail: vinyl and paper only, weed with care |
| 1.03 × 2 in (26 × 51 mm) | 1.3 mm | 351 mm | 45 | Vinyl, card and thin sheet |
| 1.55 × 3 in (39 × 76 mm) | 2 mm | 527 mm | 18 | Vinyl, card and thin sheet |
| 2.06 × 4 in (52 × 102 mm) | 2.6 mm | 702 mm | 10 | Vinyl, card and thin sheet |
| 3.09 × 6 in (78 × 152 mm) | 4 mm | 1,053 mm | 3 | Any material, including 3 mm wood and acrylic |
| 4.12 × 8 in (105 × 203 mm) | 5.3 mm | 1,404 mm | 2 | Any material, including 3 mm wood and acrylic |
| 6.18 × 12 in (157 × 305 mm) | 7.9 mm | 2,106 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More champagne SVG files
-
Champagne mimosa with an orange slice Solid · one piece -
Champagne flute with a strawberry Solid · one piece -
Champagne bottle pouring into a flute Solid · one piece -
Champagne bottle outline Outline · one piece -
Champagne bottle and flute silhouette Solid · one piece -
Layered champagne bottle in four colours Layered · 5 pieces -
Champagne bottle with a blank label Solid · one piece -
Champagne bottle popping its cork Solid · one piece
← Champagne tower of six coupes All 16 champagne designs Champagne mimosa with an orange slice →